The do all disc are brilliant. I have not had one clog with paint or anything. I have cut almost every material with them. I have used them for years. this will be my third replacement set. Thanks.

I BOUGHT ONE OF THESE ITEMS SOME TIME AGO. CUSTOMER NUMBER 112838. ORDER NUMBER OR123361. IT HAS WORN OUT, YOUR GAURANTEE SAYS IT WONT. HOW CAN I GET A REPLACEMENT PLEASE.

Thane says...
The manufacturer provides a life-time guarantee with the discs themselves. Whenever you need a new disc, simply return the old used one to the address provided on your guarantee and they will replace it. Very simple.

I have 2 discs and they are brilliant, but I have lost the joint (front and rear), arbour and fastening screw which means that I cnt use the discs. Is it possible to buy the bits that I need?

- If you bought the product from us and you are within your year warranty, please call our Customer Services on 0871 437 0212.

Unfortunately, if this is not the case we would be unable to assist.

Will the disc sand a varnished floor without the disc getting clogged up?

Thane says:
It will sand a floor but it may be too harsh if you want a light sanding, it really depends what you are trying to achieve.

when disc is assembled as required and fully tightened it is still possible to turn the disc by hand. is this as expected.joseph.

Thane says:
You should ensure that the disc is tight and cannot move - the washers should prevent this.

Can the sparks that come from the disc when cutting metal cause a fire?

Kind regards
John

Thane says:
John, it is very important that you do not create sparks in an environment where there is a risk of the sparks catching light such as near dry sawdust or oiled rags. Naturally, sparks can create fire and so usual care should be taken.

I would like to order the Aston do all disc to be delivered in spain - How can I do this.

Thane says:
Sorry, we do not deliver outside of the UK. You should arrange a friend to deliver these to in the UK and have them sent on later.

will the bench attachment fit my drill which has a 1.75 dia

Thane says:
Assuming you mean inches - the attachment is adjustable to that width.

It says in the Fibre Mesh Grinding Discs & Cutting Discs Applications pdf file that there is a 4" cutting disk also, are these still available and how do I order them please?

Thane says:
Click on 'Accessories' to see all available additional items for this product.

will the disc cut through skin if i slip with the drill.

Thane says:
We supply a DIY safety kit, but advise you take precautions, and make sure you do not slip!

I have a couple of do it all discis. one of those discis I have used it once to cut a matel pipe and worn down ... I don't have the address to send me a new one. Thank you

Thane says:
The instructions are here:
http://www.thanedirect.co.uk/products/diy/doalldisks/Du-instructions.pdf

can you please send me the details so I can claim my free replacement, as instructions lost, as had disc's so long. many thank's gary.

Thane says:
http://www.thanedirect.co.uk/products/diy/doalldisks/Du-instructions.pdf

hi im intrested in your disc cuting grinding tool but got no phone no to order would you plese e mail phone no thanks

Thane says:
Welcome to the Internet Colin! Try clicking your mouse on the 'BUY' button. You will be amazed!

Just got disks etc yesterday and they're perfect for the job I needed them for but after a few hours of on/off use the screw which holds the disk in place has snapped off. Can I get a replacement drill connector from anywhere? The box didn't contain any instruction manual or an address for Aston so I'm stuck for what to do next.

Thane says:
Email customer services, you are entitled to a replacement connector and this is no problem. The address for replacement discs is also listed below.

is the disc able to cut through granite ? i have a granite work top that needs cutting down to fit. regards kevin

Thane says:
Yes, it should but it depends on a few other factors such as type of granite. We cannot see why it would not work though.

wonderful product,my most used cutting tool ,I have one disc I dont use as it has become badly chipped on the cutting edge,does this qualify for a replacement ?thanks.Yours,R.Mariner.

Thanes says:
Yes - just follow the instructions on how to get replacements from the manufacturer.

Can the discs cut through wall tiles, and does it come with attachment to fit drills?

Thane says:
Yes it has an attachment and wil cut most wall tiles depending what they are made of. The best way to know is to try...

Will it cut a concrete fence post?

Thane says:
It shoudl be able to cut the post, it is difficult to say without knowing what type of concrete etc - try it and let us know how you get on.

This disc is quality for little jobs around the house, I've used it exstensively and I have yet to be dissapointed. i have set the fire alarm off when sanding wood the heat was so great yet the disc remained cool. The disc dosnt like paint and collects paint but still cuts. I have returned one disc I destroyed(too keen) but I had used it on various jobs before and they sent me two discs back. (happy with that). Im totally satisfied with the product. No more sandpaper for me. Thanks.

Does the do all disc cut paving slabs

Thane says:
It can - but you are better with a special angle grinder for paving slabs if they are very thick.

does the do all disc cut marble?

Thane says:
It is quite specialised to cut marble, it depends on the type etc, it also depends how much and what type of cuts you need to make.

we ave a job cutting concrete fibre board we think this blade might do the job but need bigger bores is it possible to contact the manufacturer to see if they do bigger blades


Thane says:
Sorry, this is these are the only size they make.

i bought a do all disc from you about two weks ago and my husband used it twice and it has worn on the edges can you help me how do i go about another one
thank you

Thane says:
The Do It All Discs have a lifetime warranty. Just go back to the instructions that came with the product and you will see full instructions on how to get the new replacements.

I have a circular saw with a base diameter of 210mm and the hole is 30mm. Would your blade fit htis machine ? - Thanks

Thane says:
The O/D is 7" (178mm) and it is designed for use with a 1/2" (12.5mm) arbour.
I hope this helps.

Could you tell me how much it costs for you to post a disc to me if it wears out under guarantee

Thane says:
You will see in theinstructions that you send this item back to Aston Trading(UK) who are the manufacturers. They will send you a new disc if you cover the cost of their shipping and handling. You can ask for new discs as often as you need under the terms of the guarantee.

In just 8 minutes of cutting through normal domestic brick (to create a small opening) the disc wore down.

Thane says:
Steve you need to closely follow the instructions with the use of this item to get the best from it. The instructions also show you how to redeem your lifetime guarantee and get new discs sent to you every time they wear down. It is impossible to cut a brick for 8 minutes constantly without creating some wear on the cutting disc, that is why we offer a lifetime replacement service.

hi i just wanted to know dose the disc cut bricks

Thane says:
Yes these discs cut bricks - just follow the instructions that come with the product.

I got discs through QVC and they have worn out. Do to your lifetime garantee i need your mailing address .many thanks.

Thane says:
John you need to call QVC as they are the ones that sold you this item! Thane is not the manufacturer and can only supply replacements to our customers under the lifetime gurantee system. However, we are sure QVC can help you.

does the discs cuts wood,

Thane says
Yes - just follow the instructions on how to cut wood with the discs.

I was just wondering how long i can expect these discs to last me? Many thanks,
Adam

A: Hi Adam, this is a difficult question because it depends on how much you use it and what you are cutting. But remember you have a lifetime guarantee. Just pay the postage and the manufacturer will replace the cutting discs.

does the product work?the return pross is too lenthy n dont have time,how gud cust service you have?work as DIY

A: Hi Rana! Actually, our returns process has been refined and it is very simple. Our Customer Service team is very friendly and would be happy to discuss teh product with you further and help you with your purchase.

does the do all disc cut wood?

Hi Harish! The Do All Disc can cut through wood.

what is the o/d of blade and also the diametre of of centre hole my machines req is 150/160mm x 20mm centre is it compatable

Thane says:
The O/D is 7" (178mm) and it is designed for use with a 1/2" (12.5mm) arbour.
Thus, it is not suitable for use with this machine. Sorry!

I have a couple of du-all discs for some time now, but one has worn down to about a quarter of it's original size.Could you please tell me what procedure is to exchange it for a new one. Thank you.

A: Hi Richard! Inside the instruction manual there is an address to request the replacements. All we ask is that you cover the cost of posting the new discs. If you have not kept the instructions, simply call or email our friendly customer service team. Thanks!